SONY VGN-CS190Y Notebook Drivers
Run a FREE scan for SONY VGN-CS190Y Notebook Drivers Related errors
Notebook Drivers >
SONY >
SONY VGN-CS190Y Drivers of SONY VGN-CS190Y Notebook. Select your Drivers of SONY VGN-CS190Y for downloading.
You can download SONY VGN-CS190Y Notebook Driver here, but NotebooksDrivers.com`s Team strongly recommend you to use Driver Detective to Update your SONY VGN-CS190Y Drivers and SONY Drivers.
Important Notes Download and Installation Instructions
Download the REDAUD-70163853-32.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the REDAUD-70163853-32.EXE file to begin the installation. At the REALTEK High Definition Audio Driver screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the Finish screen, click Finish. The installation of the
REALTEK High Definition
Audio Driver is complete.
Important Notes
- During the installation of this update do not turn the computer off or cancel the update.
-
-
-
Download and Installation Instructions
Download the OPFOPD-00211176-1060.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the OPFOPD-00211176-1060.EXE file to begin the installation. At the User Account Control screen, click Continue or Yes. At the Optiarc BD ROM BC-5500S {3020} screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the {3020} Updater screen, read the caution information, then click Yes to continue. At the Firmware Updater screen, click Flash to start the update. At the Update Completed screen, click OK to restart the computer. After the computer restarts, the installation of the
Optiarc BD-
ROM BC-5500S Firmware Update is completed.
Important Notes Download and Installation Instructions
Download the ALDBLT-70205933-US.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the ALDBLT-70205933-US.EXE file to begin the installation. At the ALPS bluetooth driver screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the Finish screen, click Finish. The installation of the
ALPS bluetooth driver is complete.
Important Notes
- During the installation of this update do not turn the computer off or cancel the update.
-
-
-
Download and Installation Instructions
Download the MTFOPD-00208095-1060.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the MTFOPD-00208095-1060.EXE file to begin the installation. At the User Account Control screen, click Continue or Yes. At the MATSHITA BD-CMB UJ130AS screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the F/W Loader {3020} Upgrade Utility screen, follow the instructions, then click OK to continue the installation. At the confirmation page, click OK. At the To start {3020} upgrade screen, confirm the firmware version, then click OK. At the Successfully completed screen, click Exit. At the Finished screen click Finish. Shutdown the computer, wait 30 seconds, then power on the computer. After the computer restarts, the installation of the Matshita BD-CMB UJ130AS Firmware Update is completed.
Important Notes Download and Installation Instructions
Download the INDOTH-00208326-10.1.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the INDOTH-00208326-10.1.EXE file to begin the installation. At the User Account Control screen, click Yes. At the intel sata driver Registry Patch screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the Finished screen, click Finish. If the Program Compatibility Assistant screen appears, click This program installed correctly. The installation of the
intel sata driver Registry Patch is complete.
Important Notes Download and Installation Instructions
Download the RIDFMC-70165685-32.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the RIDFMC-70165685-32.EXE file to begin the installation. At the SD Card Driver window, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the Finish screen, click Finish. The installation of the SD Card
Driver is complete.
Important Notes Download and Installation Instructions
Download the RIDFMC-70165670-32.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the RIDFMC-70165670-32.EXE file to begin the installation. At the Memory Stick Driver window, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the Finish screen, click Finish. The installation of the Memory Stick
Driver is complete.
Important Notes Download and Installation Instructions
Download the CODMOD-70157851-32.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the CODMOD-70157851-32.EXE file to begin the installation. At the User Account Control window, click Yes. At the CONEXANT modem driver screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, select I Agree and then click Next. At the Finish screen, click Finish. The installation of the
CONEXANT modem driver is complete.
Important Notes Download and Installation Instructions
Download the INDOTH-70147594-32.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the INDOTH-70147594-32.EXE file to begin the installation. At the User Account Control window, click Yes. At the intel chipset Driver for MICROSOFT® Windows® 7 screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the Finish screen, click Finish. The installation of the
intel chipset Driver is complete.
Important Notes Download and Installation Instructions
Download the SOASUS-70201315-US.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the SOASUS-70201315-US.EXE file to begin the installation. At the Setting Utility Series screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the Finish screen, click Finish. The installation of the Setting Utility
Series is complete.
Important Notes Download and Installation Instructions
Download the SOAOTH-70193336-US.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the SOAOTH-70193336-US.EXE file to begin the installation. At the VAIO Launcher screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the Finish screen, click Finish. The installation of the VAIO Launcher Software is complete.
Important Notes Download and Installation Instructions
Download the SOAVCC-70192539-US.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the SOAVCC-70192539-US.EXE file to begin the installation. At the VAIO Control Center screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the Finish screen, click Finish. The installation of the VAIO Control Center Software is complete.
System Requirements Go to Table of Contents
- To install this update it is necessary to have Picture Motion Browser version 1.1 ¡ª 5.1, or Cyber-shot Viewer version 1.0, already installed on the computer.
- At least 700 MB of free hard disk space is required to Download and install this update.
- A video card with at least 32 MB (64 MB is recommended) of memory is required to use the Movie Tracer function. Please follow the steps below to check the size of the video card memory:
- Press the Windows key and the R key at the same time to open the Run dialog box.
- At the Run dialog box, in the Open: textbox, type dxdiag and then click OK
- If a Do you want to allow DxDiag to check... message box opens, click Yes.
- At the DirectX Diagnostic Tool window, click the Display tab.
- On the Display tab, the amount of Video memory is listed in the Device section at the upper left.
- When using the eDeco function with HD (high definition) videos, an Intel® Core 2 Duo 2.4 GHz or faster CPU is recommended.
- Additional requirements for playing or editing HD videos:
- CPU: One of the following: Intel Pentium 4 2.8 GHz or fasterIntel Pentium Duo 2.8 GHz or fasterIntel Core Duo 1.66 GHz or fasterIntel Core 2 Duo 1.20 GHz or faster
- RAM: 1 GB or more
- In a computer which does not meet the recommended System requirements, videos may not play smoothly in the Movie Tracer or eDeco screens. However, they will play properly after being saved as WMV format Video files.
- This update is intended for use with a factory preinstalled version of one of the following MICROSOFT® Windows® operating systems:
- Windows 7
- windows vista® (with Service Pack 2)
- Windows XP (with Service Pack 3)
Notes: 64-bit versions of Windows XP operating system are not supportedStarter versions of Windows XP and windows vista operating systems are not supportedOperation is not guaranteed in an upgraded or multi-boot environment
Important Notes Go to Table of Contents
- To install this update it is necessary to have Picture Motion Browser version 1.1 ¡ª 5.1 already installed on the computer.
- Different SONY® {3040} imaging products support different features of Picture Motion Browser software. If you have more than one Picture Motion Browser install disc, it is strongly recommended to install all versions from the original install discs before installing this update.
- The computer must be connected to the Internet in order to use the Download Manager tool.
- During the installation of this file, be sure that you are logged in to the computer as the Administrator or as a user with Administrative rights.
-
-
Feature Changes When Updating Version 4.x or Older Go to Table of Contents If you are updating Picture Motion Browser version 4.x or older, certain functions will be removed by installing version 5.2.
- The following functions included in some versions of Picture Motion Browser will no longer be available:
- Adding Favorite marks to images
- Image Export Tool in Picture Motion Browser version 3.0.02
- Importing images with album data from a DSC-T2
- Playlist Disc Creation
- Highlight index for expanded videos
- Deleting images from the HDD or the internal memory in the CAMCORDER
- Converting an AVCHD disc to a DVD-Video disc in Video Disc Copier
- Creating a DVD-Video disc with still images
- Exporting videos to a tape in the DV/HDV CAMCORDER
- PMB Exporter for Walkman®
- The following functions will also be removed but can be re-added using the Download function of PMB Launcher:
- Movie Tracer
- eDeco
- PMB Portable Maintenance Tool
Note: PMB Portable Installer can be used instead of the Maintenance Tool. - Exporting images with album data to a DSC-T2
- Album Editor for a DSC-G1
Download and Installation Instructions Go to Table of Contents
Click the Download Now link at the top or bottom of this page. At the Software Agreement page, read the agreement, then, if you agree, click Accept Agreement to continue with the download. Download the DownloadManager_1004a.exe file to a temporary or download directory (please note this directory for reference). The computer must be connected to the Internet in order to use the Download Manager tool. Go to the directory where the file was downloaded and double-click the DownloadManager_1004a.exe file to run Download Manager. Download Manager determines what version of the Picture Motion Browser installer you need, and then downloads the appropriate Picture Motion Browser version 5.2 update.
IMPORTANT: Download Manager transfers information about the version of Picture Motion Browser installed on the computer, and what Operating System is being used, to the server administered by SONY. Sony uses this information solely for the purpose of management and diagnosis for providing the Picture Motion Browser update program. Download Manager does not transfer any information that may identify an individual. When the following screen appears, click Complete.
At the File Download screen, click Save to download the update file to a temporary or download directory (please note this directory for reference).
Note: The version of the update file is different depending on the version of Picture Motion Browser already installed on the computer: - If Picture Motion Browser version 4.x or older, or Cyber-shot Viewer is installed, the download file is PMB52_Upgrade1004a.exe (182 MB - 191,691,552 bytes.
- If Picture Motion Browser version 5.0 or later is installed, the download file is PMB52_Upgrade1004b.exe (20.5 MB - 21,569,312 bytes).
Go to the directory where the file was downloaded and double-click the update file (PMB52_Upgrade1004a.exe or PMB52_Upgrade1004b.exe) to begin the installation. Please follow the on-screen prompts carefully to complete the installation. Installation Verification (Optional) Go to Table of Contents Please follow the steps below to verify that the update has been installed.
Start the Picture Motion Browser software. On the Menu Bar, click Help and then select About Picture Motion Browser. The Picture Motion Browser Version number should be 5.2.00.03250
Note: If the version number is not 5.2.00.03250, please re-run the Download Manager and install the update again. How to Install the Blu-ray Disc Add-on Software Go to Table of Contents
- If you have a Sony AVCHD camcorder, and computer with a Blu-ray Disc burner, you can create high definition videos in Blu-ray Disc format from videos recorded with the Sony AVCHD camcorder by using Picture Motion browser and the Blu-ray Disc Add-on software.
Note: Approximately 50 GB of available disk space may be required to create discs in Blu-ray Disc format. - Please visit the PMB Blu-ray Disc Add-on Software page to download and install the Blu-ray Disc Add-on software.
Download Notes: Picture Motion Browser version 4.0 or higher must be installed on the computerA Sony AVCHD camcorder must be connected to the computer
Notes on Using the Upload Function Go to Table of Contents It is recommended to connect to the Internet when you first use Picture Motion Browser after installing the update, so that you can obtain the latest online service information.If the Information Tool screen shown on the right appears, please select Check for program updates now and click Enable Automatic Notification to always obtain the latest service information.
Note: To manually run the Information Tool click the icon on the menu bar and then select Get the Latest Media Services.
Important Notes
- In order to install PMB Exporter for WALKMAN you must have Picture Motion Browser version 3.0.00 or higher installed on your computer.
- PMB Exporter for WALKMAN requires a computer using one of the following MICROSOFT® Windows® operating systems:
- Windows XP with SP3 (32-bit editions only)
- windows vista® with SP1 (32-bit and 64-bit editions)
Note: Starter editions of the operating System are not supported. - To Download and install PMB Exporter for WALKMAN your computer must have at least 50 MB of available hard disk space.
-
-
-
Check the Picture
Motion Browser Version Please follow the steps below to check the currently installed version of Picture Motion Browser.
Start the Picture Motion Browser software. On the Menu Bar, click Help and then select About Picture Motion Browser. The Picture Motion Browser Version number should be 3.0.00 or higher
Note: If the version number is not 3.0.00 or higher, please update your Picture Motion Browser software. Download and Installation Instructions
Download the PMBWMExporterInst_v11.exe file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the PMBWMExporterInst_v11.exe file to begin the installation. Please follow the on-screen prompts carefully to complete the installation. PMB Exporter for WALKMAN FAQ Q: I cannot export still images to the Walkman
Player.A: Only still images in JPEG (JPG) format can be exported. Still images in
Other formats cannot be exported.Q: I cannot export videos to the Walkman
Player.A: Only videos in WMV format can be exported, and the Walkman player must be compatible with WMV format
Video files.Q: To which folder in Walkman player will the videos be exported?A: Videos are exported to the PMB folder in the
Video folder of Walkman player.Q: Still images exported to the Walkman player dont play back.A: There are some restrictions on still images for the Walkman player:
- Maximum total number of still images: 10,000
- Maximum total number of folders: 1,000
- Maximum size of still images: 4,000 x 4,000 pixels
Note: These restrictions may vary depending on the Walkman player model. Q: The folder name for exported still images differs from the shooting date shown in Picture Motion Browser.A: Still images that do not include a shooting date in EXIF information stored in the file may be exported to a folder with a different name from the date shown in Picture Motion Browser.
Note: This may occur when exporting still images using the Sort images by shooting date for folders function.Q: PMB Exporter for WALKMAN does not work even though the Walkman player is connected to the computer.A: It may be necessary to install the software that was supplied with the Walkman player in order for PMB Exporter to work.
Important Notes
- Picture Motion Browser versions 4.2.10 and higher include the PMB Launcher function. It is not necessary to separately install this utility.
- In order to install PMB Launcher you must have Picture Motion Browser version 3.x installed on your computer.
- PMB Launcher requires a computer using one of the following MICROSOFT® Windows® operating systems:
- Windows 2000 Professional with SP4
- Windows XP with SP3 (32-bit editions only)
- windows vista® with SP1 (32-bit and 64-bit editions)
Note: Starter editions of the operating System are not supported. - To Download and install PMB Launcher your computer must have at least 50 MB of available hard disk space.
-
-
-
Download and Installation Instructions
Download the PMBLauncherInst.exe file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the PMBLauncherInst.exe file to begin the installation. The file is automatically extracted, and the message The InstallShield Wizard will install PMB Launcher on your computer. is displayed. Click Next to continue. At the License Agreement screen, read the agreement, then, if you agree, select I accept the terms of the license agreement and then click Next. At the Ready to Install the Program screen, click Install. At the InstallShield Wizard Complete screen, click Finish. To start PMB Launcher, double-click the PMB Launcher icon on the Desktop.
Important Notes Download and Installation Instructions
Download the UPDFPD-70164381-32.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the UPDFPD-70164381-32.EXE file to begin the installation. At the UPEK FingerPrint Sensor Driver screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, select I Agree and then click Next. At the Finish screen, click Finish. The installation of the UPEK FingerPrint Sensor
Driver is complete.
Important Notes Download and Installation Instructions
Download the UPAPWD-70189536-32.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the UPAPWD-70189536-32.EXE file to begin the installation. At the Protector Suite QL screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue the installation. At the Finish screen, click Finish. The installation of the UPEK Protector Suite QL Software is complete.
Important Notes Download and Installation Instructions
Download the SOAVCA-00218274-1060.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the SOAVCA-00218274-1060.EXE file to begin the installation. At the User Account Control window, click Yes or Continue. At the VAIO Care screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the Finished screen, click Finish. The installation of the VAIO Care Software Update is complete.
Important Notes Download and Installation Instructions
Download the SOAOTH-70189922-US.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the SOAOTH-70189922-US.EXE file to begin the installation. At the VAIO Original Function Settings screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the Finish screen, click Finish. The installation of the VAIO Original Function Settings Software is complete.
Important Notes Download and Installation Instructions
Download the SOAOTH-70204996-US.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the SOAOTH-70204996-US.EXE file to begin the installation. At the VAIO Care screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the Finish screen, click Finish. The installation of the VAIO Care Software is complete.
Important Notes Download and Installation Instructions
Download the SOAOTH-70000000-US.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the SOAOTH-70000000-US.EXE file to begin the installation. At the User Account Control screen, click Yes. At the VAIO Help and Support screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the Finished screen, click Finish. The installation of the VAIO Help and Support Software is complete.
Important Notes Download and Installation Instructions
Download the SOAOTH-70192851-US.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the SOAOTH-70192851-US.EXE file to begin the installation. At the VAIO Hardware Diagnostics screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the Finish screen, click Finish. The installation of the VAIO Hardware Diagnostics Software is complete.
Important Notes Download and Installation Instructions
Download the SOAOTH-70189504-US.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the SOAOTH-70189504-US.EXE file to begin the installation. At the VAIO Location Utility screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the Finish screen, click Finish. The installation of the VAIO Location Utility is complete.
Important Notes Download and Installation Instructions
Download the UNAOTH-00209728-1040.EXE file to a temporary or download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the UNAOTH-00209728-1040.EXE file to begin the installation. At the User Account Control screen, click Yes. At the iTunes Trademark Notation Unified Update Program screen, click Next. At the License Agreement dialog, read the agreement, then, if you agree, click I Agree to continue with the installation. At the InstallShield Wizard Complete screen, click Finish. At the Finished screen click Finish. At the Program Compatibility Assistant screen, click This program installed correctly. After the computer restarts, the installation of the iTunes Trademark Notation Unified Update Program is complete.
Important NotesDownload and Installation Instructions
Download the file to a temporary or Download directory (please note this directory for reference). Go to the directory where the file was downloaded and double-click the file to begin the installation. Please follow the on-screen prompts carefully to complete the installation.
